NAVIGATION SYSTEM SYSTEM DESCRIPTION


  1. NAVIGATION SYSTEM OUTLINE


    1. Vehicle position tracking methods

      It is essential that the navigation system correctly tracks the current vehicle position and displays it on the map. There are 2 methods to track the current vehicle position: autonomous (dead reckoning) and GPS* (satellite) navigation. Both navigation methods are used in conjunction with each other.

      *: GPS (Global Positioning System)

      B004AYNE03
      Operation Description
      Vehicle Position Calculation The navigation ECU calculates the current vehicle position (direction and current position) using the direction deviation signal from the gyro sensor and driving distance signal from the vehicle speed sensor and creates the driving route.
      Map Display Processing The navigation ECU processes the vehicle position data, vehicle driving track and map data from the internal memory.
      Map Matching The map data from the internal memory is compared to the vehicle position and driving track data. Then, the vehicle position is matched with the nearest road.
      GPS Correction The vehicle position is matched to the position measured by the GPS. Then, the GPS measurement position data is compared with the vehicle position and driving track data. If the position is very different, the GPS measurement position is used.
      Distance Correction The vehicle speed signal includes the error caused by tire wear and slippage between the tires and road surface. Distance correction is performed to account for this. The radio receiver assembly automatically offsets the signal to make up for the difference between it and the distance data of the map. The offset is automatically updated.
      B0049SSE38

      Tech Tips

      The combination of autonomous and GPS navigation makes it possible to display the vehicle position even when the vehicle is in places where GPS signals cannot be received. When only autonomous navigation is used, however, the mapping accuracy may slightly decrease.

    2. Autonomous navigation

      This method determines the relative vehicle position based on the driving track determined by the gyro located in the navigation ECU and the vehicle speed signal.


      1. Gyro sensor

        Used to calculate the direction by detecting angular velocity. It is located in the navigation ECU.

      2. Vehicle speed signal

        Used to calculate the vehicle driving distance.

    3. GPS*navigation (Satellite navigation)

      This method detects the absolute vehicle position using radio waves from GPS satellites.

      *: GPS satellites were launched by the U.S. Department of Defense for military purposes.

      B004AQPE01
      *1 Current longitude/latitude/altitude is determined using the signal arrival time from four satellites.
      Number of Satellites Measurement Description
      2 or less Measurement is impossible Vehicle position cannot be obtained because the number of satellites is not enough.
      3 2-dimensional measurement is possible Vehicle position is obtained based on the current longitude and latitude. (This is less precise than 3-dimensional measurement.)
      4 3-dimensional measurement is possible Vehicle position is obtained based on the current longitude, latitude and altitude.

    4. Map matching

      The current driving route is calculated by autonomous navigation (according to the gyro sensor and vehicle speed signal) and GPS navigation. This information is then compared with possible road shapes from the map data in the internal memory and the vehicle position is set onto the most appropriate road.

      B004AMDE05

  2. DISC PLAYER OUTLINE


    1. A disc player uses a laser pickup to read digital signals recorded on a disc. By converting the digital signals to analog, it can play music, video and audio.

      CAUTION:

      Do not look directly at the laser pickup because the disc player uses an invisible laser beam. Be sure to operate the player only as instructed.

      Note


      • Do not disassemble any part of the disc player.

      • Do not apply oil to the disc player.

      • Do not insert anything but a disc into the disc player.

    2. This player can play only audio CDs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) that have any of the following marks:

      B004CEH

    3. This player can play only DVD videos that have any of the following marks: (w/ VCD Player)

      B004BKO

    4. This player can play only DVD videos that have any of the following marks:

      B004CQU

    5. This player can play only DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) that were recorded in video format and that have any of the following marks:

      B004APE

    6. The following products may not be playable on your player.


      • SACD

      • DTS CD

      • Copy-protected CD

      • Super Video CD

      • DVD audio

      • DVD-RAM

    7. Precautions for use of discs

      Note


      • CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may not be played depending on the recording conditions or characteristics of the discs, or due to damage, dirt or deterioration caused by leaving the discs in the cabin for a long time.

      • Unfinalized CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) cannot be played.

      • CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not play.

      • If there are fingerprints or scratches on a disc, the disc may not play or the disc may skip.

      • Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may deteriorate if they are left in the cabin for a long time.

      • Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) in an opaque case.

      • SECAM color television standard discs cannot be played.

      • DualDiscs that mate DVD recorded material on one side with CD digital audio material on the other cannot be played.

      • Keep the discs away from dirt. Be careful not to damage the discs or leave fingerprints on them.

      • Hold discs by the outer edge and center hole with the label side up.

      • Leaving the disc exposed halfway out of the slot for a long time after pressing the disc eject button may cause deformation of the disc, making the disc unusable.

      • If discs have adhesive tape, stickers, disc labels or any traces of such labels attached, the discs may not be ejected or player malfunctions may result.

      • Keep the discs away from direct sunlight. (Exposure to direct sunlight may cause deformation of the disc, making the disc unusable.)

      • Do not use odd-shaped discs because these may cause player malfunctions.

      • Do not use discs whose recording portion is transparent or translucent because they may not be inserted, ejected or played normally.

      • Use only 4.7 in. (12 cm) discs.

      • Do not use 3 in. (8 cm) CDs either with or without adaptors.

      Tech Tips


      • When it is cold or raining, if the windows fog up, mist and condensation may form in the player. In such cases, the disc may skip or stop in the middle of play. Ventilate or dehumidify the cabin for a while before using the player.

      • The disc may skip if the player experiences strong vibrations when the vehicle is driven on rough roads or similar uneven surfaces.

    8. B004B5B

      Cleaning

      Note

      Do not use a lens cleaner because it may cause a malfunction in the pickup portion of the player.


      1. If dirt is on the disc surface, wipe it clean with a soft dry cloth such as an eyeglass cleaner for plastic lenses from the inside to the outside in a radial direction.

        Note


        • Pressing on the disc by hand or rubbing the disc with a hard cloth may scratch the disc surface.

        • Use of solvents such as record spray, antistatic agents, alcohol, benzine, thinners or a chemical cloth may cause damage to the disc, making the disc unusable.

  3. USB FUNCTION OUTLINE


    1. The No. 1 stereo jack adapter assembly is equipped with a USB terminal. Connecting a USB memory device or "iPod" to the No. 1 stereo jack adapter assembly allows compatible files to be played Not only is it possible to play music from a USB memory device with audio functions, it is also possible to play compatible music files that are stored on a USB memory device. Also, the "iPod" control software is installed on the radio receiver assembly, allowing song selection from the list, switching of the shuffle mode, etc., from the multi-display screen.

      Tech Tips

      Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.

    2. USB system compatible devices


      1. USB device

        The following device formats can be used:

        Compatible USB device formats

        • USB communication format: USB 2.0 HS (480 Mbps) and FS (12 Mbps)

        • File format: FAT16/32 (Windows)

        • Class: Mass storage class

        MP3, WMA and AAC files written to a USB device with any format other than those listed above may not play correctly, and their names and folder names may not be displayed correctly.

        Items related to standards and limitations are as follows:


        • Maximum directory hierarchy: 8 levels

        • Maximum number of folders in device: 3000 (including the root folder)

        • Maximum number of files in device: 9999

        • Maximum number of files per folder: 255

      2. "iPod"


        1. for Panasonic Made:

          "iPhone", "iPod", "iPod classic", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

          The following "iPhone", "iPod", "iPod classic", "iPod nano", and "iPod touch" devices can be used with this system.

          Made for:


          • "iPod touch" (6th generation)

          • "iPod touch" (5th generation)

          • "iPod touch" (4th generation)

          • "iPod touch" (3rd generation)

          • "iPod touch" (2nd generation)

          • "iPod touch" (1st generation)

          • "iPod nano" (7th generation)

          • "iPod nano" (6th generation)

          • "iPod nano" (5th generation)

          • "iPod nano" (4th generation)

          • "iPhone 6s plus"

          • "iPhone 6s"

          • "iPhone SE"

          • "iPhone 6 plus"

          • "iPhone 6"

          • "iPhone 5s"

          • "iPhone 5c"

          • "iPhone 5"

          • "iPhone 4s"

          • "iPhone 4"

          • "iPhone 3GS"

          • "iPhone 3G"

            Tech Tips


            • "iPod video" is not supported.

            • Depending on differences between models or software versions etc., some models might be incompatible with this system.


              • "iPod classic"

              • "iPod with video"

              • "iPod nano" (3rd generation)

              • "iPod nano" (2nd generation)

              • "iPod nano" (1st generation)

              • "iPhone"

        2. for Pioneer Made:

          "iPhone", "iPod", "iPod classic", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

          The following "iPhone", "iPod", "iPod classic", "iPod nano", and "iPod touch" devices can be used with this system.

          Made for:


          • "iPod touch" (6th generation)

          • "iPod touch" (5th generation)

          • "iPod nano" (7th generation)

          • "iPhone 6s plus"

          • "iPhone 6s"

          • "iPhone SE"

          • "iPhone 6 plus"

          • "iPhone 6"

          • "iPhone 5s"

          • "iPhone 5c"

          • "iPhone 5"

          • "iPhone 4s"

            Tech Tips


            • "iPod video" is not supported.

            • Depending on differences between models or software versions etc., some models might be incompatible with this system.


              • "iPod touch" (4th generation)

              • "iPod touch" (3rd generation)

              • "iPod touch" (2nd generation)

              • "iPod touch" (1st generation)

              • "iPod nano" (6th generation)

              • "iPod nano" (5th generation)

              • "iPod nano" (4th generation)

              • "iPod nano" (3rd generation)

              • "iPod nano" (2nd generation)

              • "iPod nano" (1st generation)

              • "iPod classic"

              • "iPod with video"

              • "iPhone 4"

              • "iPhone 3GS"

              • "iPhone 3G"

              • "iPhone"

  4. FILE INFORMATION OUTLINE


    1. Compatible compressed files

      Item USB DISC
      Compatible file format (audio) MP3/WMA/AAC/WAV(LPCM)/FLAC/ALAC/OGG Vorbis MP3/WMA/AAC
      Compatible file format (video) WMV/AVI/MP4/M4V/RealMedia* -
      Folders in the device Maximum 3000 Maximum 192
      Files in the device Maximum 9999 Maximum 255
      Files per folder Maximum 255 -

      *: for RealMedia Compatible

    2. Corresponding sampling frequency

      File type Frequency (kHz)
      MP3 files: MPEG 1 LAYER 3 32/44.1/48
      MP3 files: MPEG 2 LSFLAYER 3 16/22.05/24
      WMA files: Ver. 7, 8, 9*1 (9.1/9.2) 32/44.1/48
      AAC files: MPEG4/AAC-LC 11.025/12/16/22.05/24/32/44.1/48
      WAV (LPCM) files*2 8/11.025/12/16/22.05/24/32/44.1/48/88.2/96/176.4/192
      FLAC*2 8/11.025/12/16/22.05/24/32/44.1/48/88.2/96/176.4/192
      ALAC*2 8/11.025/12/16/22.05/24/32/44.1/48/64/88.2/96
      OGG Vorbis*2 8/11.025/16/22.05/32/44.1/48

      • *1: Only compatible with Windows Media Audio Standard.

      • *2: Sound source of 48 kHz or more is down-converted to 48 kHz/24 bit.

    3. Corresponding bit rates*1

      File type Bit rate (kbps)
      MP3 files: MPEG 1 LAYER 3 32 - 320
      MP3 files: MPEG 2 LSFLAYER 3 8 - 160
      WMA files: Ver. 7, 8 CBR 48 - 192
      WMA files: Ver. 9*2 (9.1/9.2) CBR 48 - 320
      AAC files: MPEG4/AAC-LC 8 - 320
      OGG Vorbis 32-500

      • *1: Variable Bit Rate (VBR) compatible

      • *2: Only compatible with Windows Media Audio Standard

      File type Quantization bit rate (bit)
      WAV (LPCM) files 16/24
      FLAC
      ALAC

    4. Compatible channel modes

      File type Channel mode
      MP3 files Stereo, joint stereo, dual channel and monaural
      WMA files 2ch
      AAC files 1ch, 2ch (Dual channel is not supported)

    5. Compatible video format

      Format Codec
      MPEG-4

      Video codec:


      • H.264/MPEG-4 AVC

      • MPEG4

      Audio codec:


      • AAC

      • MP3

      Corresponding screen size:


      • MAX 1920x1080

      Corresponding frame rate:


      • MAX 60i/30p
      AVI Container

      Video codec:


      • H.264/MPEG-4 AVC

      • MPEG4

      • WMV9

      • WMV9 Advanced profile

      Audio codec:


      • AAC

      • MP3

      • WMV9.2(7,8,9.1,9.2)

      Corresponding screen size:


      • MAX 1920x1080

      Corresponding frame rate:


      • MAX 60i/30p
      Windows Media Video

      Video codec:


      • WMV9

      • WMV9 Advanced profile

      Audio codec:


      • WMV9.2(7,8,9.1,9.2)

      Corresponding screen size:


      • MAX 1920x1080

      Corresponding frame rate:


      • MAX 60i/30p
      RealMedia (for RealMedia Compatible)

      Video codec:


      • Real Video 8,9,10

      Audio codec:


      • Real Audio

    6. Usable media


      1. Only CD-ROMs, CD-Rs (CD-Recordable), CD-RWs (CD-ReWritable), DVD-ROMs, DVD-Rs (DVD-Recordable), DVD-RWs (DVD-ReWritable) and USB devices can be used to play MP3/WMA/AAC files.

        Note


        • CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not be played.

        • If there are fingerprints or scratches on a disc, the disc may not be played or the CD may skip.

        • Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may deteriorate if they are left in the cabin for a long time.

        • Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) in an opaque case.

    7. ID3 tag, WMA tag, AAC tag, TAG and Vorbis comment


      1. Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.

        Tech Tips

        This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1.)

      2. Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.

      3. Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.

      4. Additional text information called an TAG can be input to WAV (LPCM), FLAC or ALAC files. Information such as song titles and artist names can be stored.

      5. Additional text information called an Vorbis comment can be input to OGG Vorbis files. Information such as song titles and artist names can be stored.

    8. Usable media format


      1. Usable media format

        Disc format CD-ROM Mode 1, CD-ROM XA Mode 2 Form 1, DVD-ROM
        File format ISO9660 Level 1 and Level 2 (Joliet, Romeo)

        Tech Tips


        • MP3/WMA/AAC files written in any unlisted format may not be played normally or the file names or folder names may not be displayed correctly.

        • This player is compatible with multi-session discs and can play CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) on which MP3/WMA/AAC files have been added. However, only the first session can be played.

        • Discs whose first session includes both music data and MP3, WMA and AAC format data may not be played.

      2. Standards and restrictions

        Maximum directory levels 8 levels
        Maximum number of characters for a folder name/file name 32 characters
        Maximum number of folders 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA/AAC files)
        Maximum number of files in a disc 255 (Including non-MP3/WMA/AAC files)

    9. File names


      1. Only files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac" and ".ogg" can be recognized and played as MP3, WMA, AAC, WAV, FLAC, ALAC or OGG Vorbis files.

      2. Save MP3, WMA, AAC, WAV, FLAC, ALAC or OGG Vorbis files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac" and ".ogg".

        Note

        If non-MP3, non-WMA, non-AAC files, non-WAV, non-FLAC, non-ALAC or non-OGG Vorbis files are saved with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac" or ".ogg", those files may be wrongly recognized as MP3, WMA, AAC, WAV, FLAC, ALAC or OGG Vorbis files and played. A loud noise may occur and damage to the speakers may result.

  5. "Bluetooth" OUTLINE

    B004ABYC01
    *1 Cellular Phone ("Bluetooth" compatible type) *2 Radio Receiver Assembly (Built-in "Bluetooth" receiver antenna)
    *3 Portable Audio Player ("Bluetooth" compatible type) - -
    *a Example *b Cellular Network
    *c "Bluetooth" Wireless Connection - -

    1. "Bluetooth" is a trademark owned by Bluetooth SIG, Inc.

    2. "Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

      Tech Tips

      The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.

    3. Hands-free function


      1. The "Bluetooth" built-in radio receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

        *: Some versions of "Bluetooth" compatible cellular phones may not function properly.

      2. The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.

      3. Compatible hands-free devices

        Required "Bluetooth" specifications Ver. 2.0 or higher (Ver. 4.1 + EDR or higher recommended)
        Compatible profiles

        • HFP (Hands Free Profile) Ver. 1.0 or higher (Ver. 1.7 or higher recommended)*1

        • OPP (Object Push Profile) Ver. 1.1 or higher (Ver. 1.2 or higher recommended)*1

        • PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)*1

        • SPP (Serial Port Profile) Ver. 1.2 or higher*2

        • MAP (Message Access Profile) Ver. 1.2 or higher*3

        • PAN (Personal Area Networking) Ver. 1.0 or higher*4
        Maximum number of hands-free devices that can be registered (including audio devices) 5

        • *1: This profile is necessary when using the hands-free function.

        • *2: This profile is necessary when using the Enform function (w/ Enform Function) or smartphone linked function (w/ Smartphone Linked Function).

        • *3: This profile is necessary when using the message function (w/ SMS/MMS/e-mail Function).

        • *4: This profile is necessary when using the connected services function (w/ Connected Services).

        Tech Tips

        The amount of remaining battery charge displayed on the radio receiver assembly may be different from that of the "Bluetooth" device.

    4. "Bluetooth" audio function


      1. The "Bluetooth" built-in radio receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio receiver assembly.

        *: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the radio receiver assembly may be limited.

      2. Compatible "Bluetooth" audio devices

        Required "Bluetooth" specifications Ver. 2.0 or higher (Ver. 4.1 + EDR or higher recommended)
        Compatible profiles

        • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)

        • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)
        Maximum number of audio devices that can be registered (including hands-free devices) 5

        Tech Tips


        • The amount of remaining battery charge displayed on the radio receiver assembly may be different from that of the "Bluetooth" device.

        • When Bluetooth audio and "Miracast" are connected simultaneously, audio output priority varies depending on the specifications of the device.

        • Bluetooth and "Miracast" and other "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, if Bluetooth audio and "Miracast" are connected at the same time some sound skipping etc., may occur.

  6. RADIO DESCRIPTION


    1. Radio frequency band


      1. Radio broadcasts use the radio frequency bands shown in the table below.

        B004CGIE08

    2. Service area


      1. B004AJYC06
        *a FM (Stereo)
        *b FM (Monaural)
        *c AM

        The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.

    3. Radio reception problems

      Tech Tips

      In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


      1. B004A74C06
        *a Phasing
        *b Ionosphere

        Phasing

        AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.

      2. B004CE7C06
        *a Multipath

        Multipath

        Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.

      3. B004BAAC05
        *a Fade Out

        Fade out

        Fade out is caused by objects (buildings, mountains and other large obstructions) that deflect part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to be deflected.

    4. Noise problem

      Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

      Radio Frequency Noise Occurrence Condition Presumable Cause
      AM Noise occurs in a specific area Foreign noise
      Noise occurs when listening to an intermittent broadcast An identical program transmitted from multiple towers can cause noise where the signals overlap
      Noise occurs only at night Signal phasing
      FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency

  7. VEHICLE CUSTOMIZATION OUTLINE


    1. Customization of functions can also be customized on the multi-display screen. Refer to the Owner's Manual for further information on customizable items for the navigation system.

      Tech Tips


      • Items available for customization via the navigation system can also be customized by using the GTS.

      • Some customize parameters displayed on the GTS will be displayed on the "Vehicle Customization" screen for the navigation system. Users can customize these items.

  8. DIGITAL AUDIO BROADCAST (DAB) FUNCTION OUTLINE (w/ DAB Function)


    1. Digital Audio Broadcast (DAB) is the standard for digital radio. Compared to conventional FM/AM broadcasting, DAB enables higher sound quality radio broadcasting with lower noise when reception conditions change. DAB has an FM-Link function that automatically and temporarily changes to the simultaneously broadcasted FM station when the DAB broadcasting reception level falls.

  9. EXPORT / IMPORT MEMORY POINT FUNCTION OUTLINE


    1. This function allows memory points stored in the radio receiver assembly to be registered to another radio receiver assembly. Memory points stored in the radio receiver assembly can be exported to a USB device. Data exported to a USB device can be imported to another radio receiver assembly using a USB device.

  10. AUTOMATIC SOUND LEVELIZER (ASL) FUNCTION OUTLINE


    1. The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume level based upon vehicle speed signals that it receives from the combination meter assembly.

  11. "Wi-Fi" OUTLINE


    1. "Wi-Fi" is divided into two functions described in the following table.

      Function Description
      Station Function* Function that connects the radio receiver assembly to an access point
      P2P Function Function that connects the radio receiver assembly to another device directly

      • *: w/ "Wi-Fi" (Station) Function

    2. "Wi-Fi" is a worldwide wireless communication standard widely used as a short range communication tool.

    3. "Wi-Fi" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.

    4. The radio receiver assembly uses the 2.4 GHz frequency band for "Wi-Fi" communication.

      Tech Tips

      The communication performance of "Wi-Fi" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.

  12. ENFORM FUNCTION OUTLINE (w/ Enform Function)


    1. Enform App Suite


      • The Enform App Suite is a function that allows apps installed to cellular phones or the head unit to be displayed and operated on the multi-display screen.

      • It is necessary to connect a cellular phone to the radio receiver assembly via "Bluetooth" and USB connection when using Enform App Suite. A "Bluetooth" connection is required for connecting cellular phones to the radio receiver assembly. When using Enform Apps (Infotainment Apps) that support Enhanced Mode, the application will operate even without a USB connection, but in a limited mode with only basic screen display. For details regarding Enform App Suite operations, each of the applications and compatible phones, refer to http://www.lexus.com.au/.


      1. Operating description for when using Enform App Suite:

        The Enform Apps (Infotainment Apps) are divided by attributes into [Enhanced Mode Incompatible] or [Enhanced Mode Compatible] depending on application.


        • For [Enhanced Mode Incompatible], Enform Apps (Infotainment Apps) are installed to the radio receiver assembly and communication is performed through the TSL server for radio receiver assembly and "Bluetooth" connections and cellular phones connected via USB ("Bluetooth" connection required). In this case, a bridge is performed between the head unit and cellular phone through the Enform App (Companion App) installed to the cellular phone.

        • For [Enhanced Mode Compatible], Enform Apps (Infotainment Apps) are installed to both the radio receiver assembly and the cellular phone and communication is performed through the TSL server for radio receiver assembly and "Bluetooth" connections and cellular phones connected via USB ("Bluetooth" connection required). In this case, a bridge is performed between the head unit and cellular phone through the Enform App (Companion App) installed to the cellular phone.

        B004BAGC01
        *1 Radio Receiver Assembly *2 Cellular Phone
        *a Enhanced Mode Incompatible *b Enhanced Mode Compatible
        *c Example *d TSL Server
        *e

        "Bluetooth" and USB connection

        ("Bluetooth" connection required)

        		 *f

        "Bluetooth" and USB connection

        ("Bluetooth" connection required. Operates with reduced functionality/basic screen display when operating without a USB connection)
        *9

        Enform App (Companion App)

        (App for performing bridge through the head unit and cellular phones)

        		 *h Enform App (Infotainment App)

  13. CONNECTED SERVICES OUTLINE (w/ Connected Services)


    1. The following services are available by connecting the navigation system to Lexus's portal site via the internet using a cellular phone or "Wi-Fi" network.


      • Online search: New establishments, such as restaurants, bars, etc., that are not registered in the navigation system can be set as a destination.

      • Importing memory points: Establishments that were searched for using a personal computer can be set as a destination and can be registered as memory points.

      Tech Tips


      • For known compatible phones, refer to www.my.lexus.eu.

      • It is necessary to agree to the terms of service for the search engine on www.my.lexus.eu. Failure to do so may cause problems such as not being able to select the search engine or the screen not transferring to the next screen when "Online search" is selected.

      • Search results may not be displayed if the target establishment is not in the data supplied by the provider or in the map data of the navigation system.

      • As the information for a destination set using the connected services is supplied by the provider, the navigation system may guide to a location that deviates from the actual destination.

  14. G-BOOK OUTLINE (w/ Telematics Transceiver)


    1. The following service is available by connecting the navigation system to Lexus's portal site via the internet using a telephone transceiver assembly.


      • Online search: New establishments, such as restaurants, bars, etc., that are not registered in the navigation system can be set as a destination.

      Tech Tips


      • For known compatible phones, refer to http://lexus.com.cn/cn/server/znfj.html.

      • It is necessary to agree to the terms of service for the search engine on http://lexus.com.cn/cn/server/znfj.html. Failure to do so may cause problems such as not being able to select the search engine or the screen not transferring to the next screen when "Online search" is selected.

      • G-BOOK is available only on a navigation ECU that has had its identification code registered when the account was created.

      • Search results may not be displayed if the target establishment is not in the data supplied by the provider or in the map data of the navigation system.

      • As the information for a destination set using the G-BOOK is supplied by the provider, the navigation system may guide to a location that deviates from the actual destination.

  15. TRAFFIC AND PARKING INFORMATION FUNCTION OUTLINE


    1. w/ Connected Services:


      1. Traffic information and parking lot information can be viewed. There are 2 methods to receive the above information.

        Priority Method Information
        1st Internet by using a cellular phone or "Wi-Fi" network

        • Traffic event

        • Traffic flow prediction

        • Live parking information
        2nd FM RDS-TMC (Radio Data System-Traffic Message Channel)

        Tech Tips


        • When RDS-TMC information and TPEG information can be received, TPEG information will be given priority.

        • When the source for traffic information is switched between RDS-TMC information and TPEG information, traffic information displayed on the map may change.

        • When the vehicle enters an area where TPEG information can be received, TPEG information can be received only after the vehicle has been driven for 1 km (0.6 miles) or more in the coverage area.

        • Traffic information is displayed only on a map with a scale of 20 km (12 miles) or less.

        • The traffic information display range is 30 km (18 miles) from the current position and next destination for city roads, and 100 km (62 miles) from the current position for highways.

        • Parking information is displayed only on a map with a scale of 200 m (200 yard) or less.

        • The maximum distance is set to 50 km (31 miles). The server will return up to 60 results (maximum distance depends on density of POIs).

        • Detoured route search activates only when traffic information within 200 km (124 miles) exists.

        • If there is traffic information only for traffic congestion, the route may not be changed depending on the distance of the congestion.

        • If there is no available avoidance route, the route may not be changed.

        • Depending on provided data, the "From" and "To" information of the traffic event information may not be displayed.

        • Provided data may differ from actual condition.

    2. w/ Telematics Transceiver


      1. Traffic information, traffic prediction information and parking lot information can be viewed.

        There are 2 methods to receive the above information.

        Priority Method Information
        1st FM RTIC (Real Time Information In The Cockpit)
        2nd Internet by using a telephone transceiver assembly G-BOOK

  16. "Miracast" FUNCTION OUTLINE


    1. About "Miracast"


      1. "Miracast" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.

      2. "Miracast" uses the "Wi-Fi" connection (P2P function) to display smartphone and tablet screens on the multi-display and allows for audio on the smartphone, etc., to be streamed through vehicle speakers.

        Tech Tips


        • While driving only sound playback is supported. Videos are not displayed.

        • When Bluetooth audio and "Miracast" are connected simultaneously, audio output priority varies depending on the specifications of the device.

        • Bluetooth and "Miracast" and other "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, if Bluetooth audio and "Miracast" are connected at the same time some sound skipping and image distortion, etc., may occur.

    2. Supported devices

      Supported mobile devices Android smartphones or tablets certified as "Miracast" compatible devices from the Wi-Fi alliance.

      Tech Tips


      • Depending on differences between models or software versions etc., some models might be incompatible with this system.

      • Refer to the owner's manual included with the device for information about "Miracast" support.

  17. COMMUNICATION BASED VOICE RECOGNITION FUNCTION OUTLINE (w/ Telematics Transceiver)


    1. There are two types of voice recognition; the voice recognition function uses voice recognition data stored in the onboard device. The other is communication based and uses voice recognition data sent from communication with the telephone transceiver assembly as audio signals to be stored at the center.

      Tech Tips

      Refer to the Telematics System (for G-BOOK) for information about communication based voice recognition.

      Click here

  18. MOBILE ASSISTANT FUNCTION OUTLINE


    1. With a compatible portable device connected via Bluetooth, this function allows the system to interface directly for voice recognition functions. The user operates the steering pad switch assembly to start the Mobile Assistant function and issues voice commands.

      Tech Tips

      Mobile assistant may not operate or the device may become unresponsive depending on the type of device connected, OS (iOS/Android) version or Google app version.

  19. SEARCH LEARNING ROUTE FUNCTION OUTLINE (w/ Search Learning Route Function)


    1. When this function uses the navigation function, if the user travels outside of the recommended route indicated on the navigation system a certain number of times under the same condition, the navigation system learns the user's travel pattern. After the navigation system learns the route, the learned route is used as the recommended route.

      Tech Tips

      When the map information is updated, the learned content by the function above may be reset.

  20. SEARCHING GAS STATION IN LOW FUEL FUNCTION OUTLINE (w/ Searching Gas Station in Low Fuel Function)


    1. This function alerts the user of gas stations in the nearby vicinity on the multi-display when the remaining fuel level is low.

      Tech Tips

      It is possible to select the estimated distance this function operates for in the multi-display settings. The function can also be turned off in the settings.

  21. DIAGNOSTIC FUNCTION OUTLINE


    1. The navigation system has a diagnostic function (the result is indicated on the master unit).

  22. COMMUNICATION SYSTEM


    1. MOST Network Outline

      B004AR6E04

      1. Navigation system components communicate with each other via the MOST network.

      2. The MOST network uses a shielded twisted pair of wires for its communication lines.

      3. The master unit of the MOST network is the radio receiver assembly.

      4. MOST communication lines connect each slave unit centering around the master unit to form a MOST network ring.

      5. The master unit sends a wake-up signal to activate each slave unit connected to the MOST network.

        Tech Tips

        If a short or open circuit occurs in the MOST circuit, communication will be interrupted and the system will not operate normally.

    2. AVC-LAN Outline

      B004B0QE05

      1. Components of the navigation system communicate with each other via the AVC-LAN.

      2. The AVC-LAN uses a twisted pair of wires for its communication lines.

      3. The master unit of the AVC-LAN is the radio receiver assembly.

        Tech Tips


        • The radio receiver assembly has the resistance (60 to 80 Ω) necessary for communication.

        • If a short or open circuit occurs in the AVC-LAN circuit, communication is interrupted and the system will not operate normally.

    3. Local Bus Communication Outline

      B004A6DE04

      1. Components of the navigation system communicate with each other via the local bus.

      2. The local bus uses a twisted pair of wires for its communication lines.

      3. The master unit of the local bus is the radio receiver assembly.

        Tech Tips


        • The radio receiver assembly has the resistance (108 to 132 Ω) necessary for communication.

        • The remote touch has the resistance (108 to 132 Ω) necessary for communication.

        • If a short or open occurs in the local bus circuit, communication is interrupted and the system will not operate normally.

    4. CAN Communication Outline


      1. The navigation system uses CAN communication between the radio receiver assembly and ECUs.