ACTIVE NOISE CONTROL MICROPHONE INSTALLATION

PROCEDURE

1. INSTALL MICROPHONE WIRE (for Rear Side)

   
   
   1. 

      *a	Connector color: Black (microphone side)

      Attach the clamps to install the microphone wire.

      Note

      The connectors used on the microphone side and vehicle wire harness side are the same shape. Make sure they are no mixed up when connecting.

   2. Connect the connector.

2. INSTALL ACTIVE NOISE CONTROL MICROPHONE (for Rear Side)

   
   

   1. 

      Attach the claws to install the active noise control microphone.

3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (for Rear Side)

   Click here

4. INSTALL ACTIVE NOISE CONTROL MICROPHONE (for Front Side)

   
   

   1. 

      for Glass Roof:

      
      

      1. Attach the claws to install the active noise control microphone.

      2. Connect the connector.

   2. 

      for Carbon Roof:

      
      

      1. Attach the claws to install the active noise control microphone.

      2. Connect the connector.

5. INSTALL ROOF HEADLINING ASSEMBLY (for Front Side)

   Click here

6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. INSTALL NO. 2 DECK BOARD

   Click here

8. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

9. CHECK SRS WARNING LIGHT

   Click here