INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for Center)

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. B004B2NC01
      B004CG0 Protective tape

      Install the front No. 2 speaker assembly with the 2 screws.

  2. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for Center)


    1. B004CP0C01
      B004CG0 Protective tape

      Attach the claws to install the No. 1 speaker opening cover assembly.

    2. Remove the protective tape.

  3. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY (for Side)

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. B004CQ9

      Install the front No. 1 speaker assembly with the 2 screws.

  4. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)

    Click here

  5. INSTALL FRONT PILLAR GARNISH LH (for Side)

    Click here

  6. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH (for Side)

    Click here

  7. INSTALL FRONT DOOR OPENING TRIM COVER LH (for Side)

    Click here

  8. INSTALL FRONT DOOR SCUFF PLATE LH (for Side)

    Click here