ACTIVE NOISE CONTROL SYSTEM FREEZE FRAME DATA


  1. CHECK FREEZE FRAME DATA

    Tech Tips

    Whenever an active noise control system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Active Noise Control / Trouble Codes.


      Body Electrical > Active Noise Control > Trouble Codes

    5. According to the GTS display, select a DTC that stored freeze frame data.

      Note

      Read the freeze frame data recorded when the DTC was stored.

  2. LIST OF FREEZE FRAME DATA


    Body Electrical > Active Noise Control
    Tester Display Measurement Item Range Reference Value Diagnostic Note
    Total Distance Traveled Displays the current total driving distance 0 to 16777215 Equivalent to the actual total driving distance Refer to the Total Distance Traveled - Unit for the units
    Total Distance Traveled - Unit Displays the current total driving distance units km or mile Units according destination -