STEERING COLUMN ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT TILT MOTOR


    1. B000RHEC47
      *a

      Component without harness connected

      (Tilt Motor)

      Apply 12 V battery voltage to the tilt motor connector. Then check the steering wheel tilt operation.

      OK
      Measurement Condition Specified Condition

      • 12 V battery positive (+) lead → Terminal 2 (TIM-)

      • 12 V battery negative (-) lead → Terminal 1 (TIM+)

      		 The steering wheel tilts down.

      • 12 V battery positive (+) lead → Terminal 1 (TIM+)

      • 12 V battery negative (-) lead → Terminal 2 (TIM-)

      		 The steering wheel tilts up.

  2. INSPECT TELESCOPIC MOTOR

    B000ONKC01
    *a

    Component without harness connected

    (Telescopic Motor)

    1. Apply 12 V battery voltage to the telescopic motor connector. Then check the steering column telescopic operation.

      OK
      Measurement Condition Specified Condition

      • 12 V battery positive (+) lead → Terminal 4 (TEM+)

      • 12 V battery negative (-) lead → Terminal 1 (TEM-)

      		 The steering column contracts.

      • 12 V battery positive (+) lead → Terminal 4 (TEM-)

      • 12 V battery negative (-) lead → Terminal 2 (TEM+)

      		 The steering column extends.