ELECTRIC PARKING BRAKE ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 ACTUATOR HARNESS CLAMP


    1. B004BUI

      Connect the No. 1 actuator harness clamp with the 2 clamps.

  2. INSTALL NO. 2 ACTUATOR HARNESS CLAMP


    1. B004BQS

      Connect the No. 2 actuator harness clamp with the clamp.

  3. INSTALL NO. 1 CABLE SUPPORT BRACKET


    1. B004BBZ

      Install the No. 1 cable support bracket in the direction indicated by the arrow shown in the illustration.

  4. INSTALL NO. 2 CABLE SUPPORT BRACKET


    1. B004BAF

      Install the No. 2 cable support bracket in the direction indicated by the arrow shown in the illustration.

  5. INSTALL CABLE SUPPORT BRACKET


    1. B004A1T

      Install the parking brake cable support bracket in the direction indicated by the arrow shown in the illustration.

  6. INSTALL PARKING BRAKE ACTUATOR ASSEMBLY WITH BRACKET


    1. B004AE9

      Install the parking brake actuator assembly with bracket with the 3 nuts.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }
    2. B004C1I

      connect the 2 clamps to the rear suspension member sub-assembly.

    3. Install the parking brake actuator assembly with bracket with the bolt and 6 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      B004AKH

  7. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here