ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C13A0/11, C13A5/41, C13B0

DTC Code DTC Name
C13A0/11 Open in Power Supply Relay Circuit
C13A5/41 Electric Current of Motor
C13B0 Electric Parking Brake ECU Malfunction

DESCRIPTION

13A0/11, C13A5/41 and C13B0 are stored when a malfunction occurs in the internal power supply of the parking brake ECU assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13A0/11 Open in Power Supply Relay Circuit

Both of following conditions are met:


  1. Power switch on (IG) or electric parking brake switch assembly pushed to lock side with power switch off.

  2. Parking brake ECU assembly's power source relay is open for approximately 0.5 seconds.

Parking brake ECU assembly Yes An electric parking brake system malfunction is displayed on the multi-information display.
C13A5/41 Electric Current of Motor

All of following conditions are met:


  1. Power switch on (IG) or electric parking brake switch assembly pushed to lock side with power switch off.

  2. Parking brake ECU assembly's internal current is abnormal.

  3. When parking brake is operating, problem occurs for approximately 0.3 seconds.; when parking brake is not operating, problem occurs for approximately 0.5 seconds.

Parking brake ECU assembly Yes An electric parking brake system malfunction is displayed on the multi-information display.
C13B0 Electric Parking Brake ECU Malfunction

All of following conditions are met:


  1. Power switch on (IG) or electric parking brake switch assembly pushed to lock side with power switch off.

  2. Parking brake ECU assembly's internal voltage is abnormal, or EEPROM is malfunctioning.

  3. Problem occurs for approximately 0.5 seconds.

Parking brake ECU assembly Yes An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note

If the parking brake ECU assembly is replaced, perform the "Reset Memory" and "Acquire Tension Sensor Zero Point" procedures.

Click here

PROCEDURE


  1. REPLACE PARKING BRAKE ECU ASSEMBLY


    1. Replace parking brake ECU assembly.

      Click here

      Result
      Proceed to
      NEXT

    NEXT