NAVIGATION ECU INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display, update the software of the radio receiver assembly.

    Click here

  2. INSTALL NAVIGATION ECU

  3. INSTALL NO. 1 WIRING HARNESS CLAMP BRACKET


    1. B004B2J

      Attach the guide to install the No. 1 wiring harness clamp bracket.

    2. Install the screw.

  4. INSTALL NO. 1 NAVIGATION WIRE


    1. B004BQ4

      Connect the 2 connectors to install the No. 1 navigation wire and Temporarily install the navigation ECU.

  5. INSTALL NO. 1 RADIO BRACKET

    Click here

  6. INSTALL NO. 2 RADIO BRACKET

    Click here

  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  10. INSTALL NO. 2 DECK BOARD

    Click here