SUSPENSION CONTROL SERVICE DATA

Front Acceleration Sensor
Tester Connection	Condition	Specified Condition
1 (SGFL) - 2 (SGG)	Sensor stationary	Approx. 2.0 to 2.5 V
1 (SGFL) - 2 (SGG)	Sensor vibrating vertically	Changes between approx. 0.9 and 3.6 V

Absorber Control Actuator (for Front Side)
Tester Connection		Condition	Specified Condition
for LH side	1 (FAL-) - 2 (FAL+)	15 to 25°C	3.2 to 3.8 Ω
for RH side	1 (FAR-) - 2 (FAR+)	15 to 25°C	3.2 to 3.8 Ω

Absorber Control Actuator (for Rear Side)
Tester Connection		Condition	Specified Condition
for LH side	1 (RAL+) - 3 (RAL-)	15 to 25°C	3.2 to 3.8 Ω
for RH side	1 (RAR+) - 3 (RAR-)	15 to 25°C	3.2 to 3.8 Ω

Combination Switch
Tester Connection	Switch Condition	Specified Condition
4 (P) - 1 (GND)	Combination switch assembly knob turned and held at S/S+ position	Below 10 Ω
4 (P) - 1 (GND)	Combination switch assembly knob not turned to S/S+ position	10 kΩ or higher
6 (B) - 1 (GND)	Normal/Custom mode switch pushed and held	Below 10 Ω
6 (B) - 1 (GND)	Normal/Custom mode switch not pushed	10 kΩ or higher