| Rear differential carrier oil seal drive in depth |
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
| Rear differential side gear shaft oil seal drive in depth |
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
| Differential ring gear runout |
0.05 mm (0.00197 in.) |
| Differential ring gear backlash |
0.09 to 0.145 mm (0.00355 to 0.00570 in.) |
| Differential side gear backlash (w/o LSD) |
0 mm (0 in.) |
| Differential drive pinion runout |
0.08 mm (0.00315 in.) |
| Drive pinion preload (at starting) |
New bearing |
0.52 to 0.95 N*m (5.4 to 9.6 kgf*cm, 4.7 to 8.4 in.*lbf) |
| Reused bearing |
0.43 to 0.66 N*m (4.4 to 6.7 kgf*cm, 3.9 to 5.8 in.*lbf) |
| Total preload (at starting) |
New bearing |
1.04 to 2.08 N*m (10.7 to 21.2 kgf*cm, 9.3 to 18.4 in.*lbf) |
| Reused bearing |
0.88 to 1.60 N*m (9.0 to 16.3 kgf*cm, 7.8 to 14.1 in.*lbf) |
| Rear differential side gear shaft snap ring thickness |
90521-99149 |
3.5075 to 3.5325 mm ( 0.1381 to 0.1390 in.) |
| 90521-99150 |
3.5275 to 3.5525 mm ( 0.1389 to 0.1398 in.) |
| 90521-99151 |
3.5475 to 3.5725 mm ( 0.1397 to 0.1406 in.) |
| 90521-99152 |
3.5675 to 3.5925 mm ( 0.1405 to 0.1414 in.) |
| 90521-99153 |
3.5875 to 3.6125 mm ( 0.1413 to 0.1422 in.) |
| 90521-99154 |
3.6075 to 3.6325 mm ( 0.1421 to 0.1430 in.) |
| 90521-99155 |
3.6275 to 3.6525 mm ( 0.1429 to 0.1437 in.) |
| 90521-99156 |
3.6475 to 3.6725 mm ( 0.1437 to 0.1445 in.) |
| 90521-99157 |
3.6675 to 3.6925 mm ( 0.1444 to 0.1453 in.) |
| 90521-99158 |
3.6875 to 3.7125 mm ( 0.1452 to 0.1461 in.) |
| 90521-99159 |
3.7075 to 3.7325 mm ( 0.1460 to 0.1469 in.) |
| 90521-99160 |
3.7275 to 3.7525 mm ( 0.1468 to 0.1477 in.) |
| 90521-99161 |
3.7475 to 3.7725 mm ( 0.1476 to 0.1485 in.) |
| 90521-99162 |
3.7675 to 3.7925 mm ( 0.1484 to 0.1493 in.) |
| 90521-99163 |
3.7875 to 3.8125 mm ( 0.1492 to 0.1500 in.) |
| 90521-99164 |
3.8075 to 3.8325 mm ( 0.1500 to 0.1508 in.) |
| 90521-99165 |
3.8275 to 3.8525 mm ( 0.1507 to 0.1516 in.) |
| 90521-99166 |
3.8475 to 3.8725 mm ( 0.1515 to 0.1524 in.) |
| 90521-99167 |
3.8675 to 3.8925 mm ( 0.1523 to 0.1532 in.) |
| 90521-99168 |
3.8875 to 3.9125 mm ( 0.1531 to 0.1540 in.) |
| 90521-99169 |
3.9075 to 3.9325 mm ( 0.1539 to 0.1548 in.) |
| 90521-99170 |
3.9275 to 3.9525 mm ( 0.1547 to 0.1556 in.) |
| 90521-99171 |
3.9475 to 3.9725 mm ( 0.1555 to 0.1563 in.) |
| 90521-99172 |
3.9675 to 3.9925 mm ( 0.1563 to 0.1571 in.) |
| 90521-99173 |
3.9875 to 4.0125 mm ( 0.1570 to 0.1579 in.) |
| 90521-99174 |
4.0075 to 4.0325 mm ( 0.1578 to 0.1587 in.) |
| 90521-99175 |
4.0275 to 4.0525 mm ( 0.1586 to 0.1595 in.) |
| 90521-99176 |
4.0475 to 4.0725 mm ( 0.1594 to 0.1603 in.) |
| 90521-99177 |
4.0675 to 4.0925 mm ( 0.1602 to 0.1611 in.) |
| 90521-99178 |
4.0875 to 4.1125 mm ( 0.1610 to 0.1619 in.) |
| 90521-99179 |
4.1075 to 4.1325 mm ( 0.1618 to 0.1626 in.) |
| 90521-99180 |
4.1275 to 4.1525 mm ( 0.1625 to 0.1634 in.) |
| 90521-99181 |
4.1475 to 4.1725 mm ( 0.1633 to 0.1642 in.) |
| 90521-99182 |
4.1675 to 4.1925 mm ( 0.1641 to 0.1650 in.) |
| 90521-99183 |
4.1875 to 4.2125 mm ( 0.1649 to 0.1658 in.) |
| 90521-99184 |
4.2075 to 4.2325 mm ( 0.1657 to 0.1666 in.) |
| 90521-99185 |
4.2275 to 4.2525 mm ( 0.1665 to 0.1674 in.) |
| 90521-99186 |
4.2475 to 4.2725 mm ( 0.1673 to 0.1682 in.) |
| 90521-99187 |
4.2675 to 4.2925 mm ( 0.1681 to 0.1689 in.) |
| Rear differential drive pinion plate washer thickness |
90560-62001 |
1.81 to 1.83 mm ( 0.0713 to 0.0720 in.) |
| 90560-62002 |
1.83 to 1.85 mm ( 0.0721 to 0.0728 in.) |
| 90560-62003 |
1.85 to 1.87 mm ( 0.0729 to 0.0736 in.) |
| 90560-62004 |
1.87 to 1.89 mm ( 0.0737 to 0.0744 in.) |
| 90560-62005 |
1.89 to 1.91 mm ( 0.0745 to 0.0751 in.) |
| 90560-62006 |
1.91 to 1.93 mm ( 0.0752 to 0.0759 in.) |
| 90560-62007 |
1.93 to 1.95 mm ( 0.0760 to 0.0767 in.) |
| 90560-62008 |
1.95 to 1.97 mm ( 0.0768 to 0.0775 in.) |
| 90560-62009 |
1.97 to 1.99 mm ( 0.0776 to 0.0783 in.) |
| 90560-62010 |
1.99 to 2.01 mm ( 0.0784 to 0.0791 in.) |
| 90560-62011 |
2.01 to 2.03 mm ( 0.0792 to 0.0799 in.) |
| 90560-62012 |
2.03 to 2.05 mm ( 0.0800 to 0.0807 in.) |
| 90560-62013 |
2.05 to 2.07 mm ( 0.0808 to 0.0814 in.) |
| 90560-62014 |
2.07 to 2.09 mm ( 0.0815 to 0.0822 in.) |
| 90560-62015 |
2.09 to 2.11 mm ( 0.0823 to 0.0830 in.) |
| 90560-62016 |
2.11 to 2.13 mm ( 0.0831 to 0.0838 in.) |
| 90560-62017 |
2.13 to 2.15 mm ( 0.0839 to 0.0846 in.) |
| 90560-62018 |
2.15 to 2.17 mm ( 0.0847 to 0.0854 in.) |
| 90560-62019 |
2.17 to 2.19 mm ( 0.0855 to 0.0862 in.) |
| 90560-62020 |
2.19 to 2.21 mm ( 0.0863 to 0.0870 in.) |
| 90560-62021 |
2.21 to 2.23 mm ( 0.0871 to 0.0877 in.) |