| Propeller shaft assembly (front side) runout |
Maximum runout: 0.5 mm (0.0196 in.) |
| Propeller shaft assembly (rear side) runout |
Maximum runout: 0.6 mm (0.0236 in.) |
| Propeller with center bearing shaft assembly |
Distance between the surface of the No. 1 center support bearing assembly and the surface of the cushion |
10.5 to 12.5 mm (0.414 to 0.492 in.) |
| Joint Angle |
No. 2 Joint Angle |
0°04' +/- 30' (0.07° +/- 0.50°) |
| No. 3 Joint Angle |
1°37' +/- 32' (1.62° +/- 0.53°) |
| Adjusting Washer |
Thickness |
9.0 mm (0.354 in.) |
| 11.0 mm (0.433 in.) |