HYBRID TRANSMISSION / TRANSAXLE SERVICE DATA

HYBRID TRANSMISSION SYSTEM
Speed Variation Point (D position)
Throttle sensor position 100% 1st to 2nd 54 to 63 km/h (34 to 39 mph)
2nd to 3rd 74 to 85 km/h (47 to 52 mph)
3rd to 4th 89 to 102 km/h (56 to 63 mph)
4th to 5th 117 to 133 km/h (73 to 82 mph)
5th to 6th 147 to 166 km/h (92 to 103 mph)
6th to 7th 179 to 201 km/h (112 to 124 mph)
7th to 8th 219 to 245 km/h (137 to 152 mph)
8th to 9th 298 to 332 km/h (186 to 206 mph)
9th to 10th 318 to 354 km/h (198 to 220 mph)
Throttle sensor position 100% 10th to 9th 269 to 300 km/h (168 to 186 mph)
9th to 8th 230 to 257 km/h (143 to 159 mph)
8th to 7th 172 to 193 km/h (107 to 119 mph)
7th to 6th 138 to 156 km/h (86 to 96 mph)
6th to 5th 113 to 128 km/h (71 to 79 mph)
5th to 4th 85 to 97 km/h (53 to 60 mph)
4th to 3rd 64 to 74 km/h (40 to 46 mph)
3rd to 2nd 49 to 58 km/h (31 to 36 mph)
2nd to 1st 32 to 39 km/h (20 to 24 mph)
TRANSMISSION WIRE
Tester Connection Transmission Fluid Temperature Specified Condition
1 (OT+) - Body ground Always 10 kΩ or higher
9 (OT-) - Body ground Always 10 kΩ or higher
1 (OT+) - 9 (OT-) 10°C (50°F) 6.445 kΩ
25°C (77°F) 3.5 kΩ
110°C (230°F) 0.247 kΩ
VALVE BODY ASSEMBLY
Item Tester Connection Condition Specified Condition
Solenoid (SL1) valve 1 - 2 20°C (68°F) 5.0 to 5.6 Ω
Solenoid (SL2) valve 1 - 2 20°C (68°F) 5.0 to 5.6 Ω
Solenoid (SL3) valve 1 - 2 20°C (68°F) 5.0 to 5.6 Ω
Solenoid (SL4) valve 1 - 2 20°C (68°F) 5.0 to 5.6 Ω
Solenoid (SLT) valve 1 - 2 20°C (68°F) 5.0 to 5.6 Ω
Solenoid (SC1) valve Solenoid (SC1) valve connector terminal - Solenoid (SC1) valve body 20°C (68°F) 11 to 15 Ω
Solenoid (SC2) valve Solenoid (SC2) valve connector terminal - Solenoid (SC2) valve body 20°C (68°F) 11 to 15 Ω
COMBINATION SWITCH
Item Tester Connection Condition Specified Condition
Combination switch assembly 4 (P) - 1 (GND) Combination switch assembly knob turned and held at S/S+ position Below 10 Ω
4 (P) - 1 (GND) Combination switch assembly knob not turned to S/S+ position 10 kΩ or higher
6 (B) - 1 (GND) Normal/Custom mode switch pushed and held Below 10 Ω
6 (B) - 1 (GND) Normal/Custom mode switch not pushed 10 kΩ or higher
7 (ECU) - 1 (GND) Combination switch assembly knob turned and held at Comf/Eco position Below 10 Ω
7 (ECU) - 1 (GND) Combination switch assembly knob not turned to Comf/Eco position 10 kΩ or higher
No. 2 combination switch assembly 9 (SNSW) - 1 (E) No. 2 Combination switch assembly knob turned and held at SNOW position Below 10 Ω
9 (SNSW) - 1 (E) No. 2 Combination switch assembly knob not turned to SNOW position 10 kΩ or higher
SHIFT PADDLE SWITCH
Item Tester Connection Condition Specified Condition
Transmission shift switch assembly SDN - ECC Pull continuously "-" (Down shift) Below 2.5 Ω
SDN - ECC Release "-" (Down shift) 1 MΩ or higher
SUP - ECC Pull continuously "+" (Up shift) Below 2.5 Ω
SUP - ECC Release "+" (Up shift) 1 MΩ or higher
No. 2 switch wire SDN - ECC Pull continuously "-" (Down shift) Below 2.5 Ω
SDN - ECC Release "-" (Down shift) 1 MΩ or higher
SUP - ECC Pull continuously "+" (Up shift) Below 2.5 Ω
SUP - ECC Release "+" (Up shift) 1 MΩ or higher
SPEED SENSOR
Tester Connection Condition Specified Condition
1 (SP2O) - 2 (SP2B) Low signal 4 to 8 mA
High signal 12 to 16 mA