ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. B000Y2GC03
      B000WYJ Install in this Direction (1)
      B000YNM Install in this Direction (2)

      Attach the clips going from the rear of the vehicle in the order shown in the illustration.

    2. B000Y8B

      Install the screw.

      Tech Tips

      Use the same procedure for the other side.

    3. B000WIQ

      Attach the claws and install the rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the other side.

    4. B000Z76

      Install the 2 screws.

    5. B000Z7U

      Install the 2 screws and 5 clips.

    6. B000YGQ

      Install the body rocker panel moulding assembly LH with the 3 screws.

    7. Remove the protective tape.

  2. INSTALL FRONT REAR WHEEL HOUSE PLATE LH

    Click here