ROCKER PANEL MOULDING DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 1 ROCKER PANEL MOULDING PROTECTOR

    Tech Tips

    When removing the No. 1 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 1 rocker panel moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 1 Rocker Panel Moulding Protector

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B000W5ZC40
    *a Heated Part
    *b Heat Light

    1. Remove the 2 No. 1 rocker panel moulding protectors.

      B000YF6

  2. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR

    Tech Tips

    When removing the No. 2 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 2 rocker panel moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 2 Rocker Panel Moulding Protector

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B000W5ZC40
    *a Heated Part
    *b Heat Light

    1. Remove the 2 No. 2 rocker panel moulding protectors.

      B000XUX

  3. REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR

    Tech Tips

    When removing the No. 6 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 6 rocker panel moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 6 Rocker Panel Moulding Protector

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B000W5ZC40
    *a Heated Part
    *b Heat Light

    1. Remove the No. 6 rocker panel moulding protector.

      B000UN3

  4. REMOVE NO. 2 SIDE MUDGUARD PROTECTOR

    Tech Tips

    When removing the No. 2 side moulding protector, heat the body rocker panel moulding assembly LH and No. 2 side moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 2 Side Moulding Protector

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B000W5ZC40
    *a Heated Part
    *b Heat Light

    1. for Front Side:


      1. Remove the 2 No. 2 side moulding protectors.

        B000VRI

    2. for Rear Side:


      1. B000VT1

        Remove the 2 No. 2 side moulding protectors.

  5. REMOVE REAR BUMPER PAD

    Tech Tips

    When removing the rear bumper pad, heat the body rocker panel moulding assembly LH and rear bumper pad using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    Rear Bumper Pad

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B000W5ZC40
    *a Heated Part
    *b Heat Light

    1. B000WG2

      Remove the rear bumper pad.