ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT REAR WHEEL HOUSE PLATE LH

    Click here

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. B000W3BC01
      B000WCG Protective Tape

      Apply protective tape around the body rocker panel moulding assembly LH.

    2. B000YGQ

      Turn the steering wheel to the left to provide space for the screw to be removed.

    3. Remove the 3 screws.

    4. B000Z7U

      Remove the 2 screws and 5 clips.

    5. B000Z76

      Remove the 2 screws.

    6. B000U5V

      Detach the claws and remove the rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the other sides.

    7. B000Y8B

      Remove the screw.

      Tech Tips

      Use the same procedure for the other sides.

    8. B000UMHC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction (1)
      B000YNM Remove in this Direction (2)

      Place your hand at the position shown in the illustration and while pulling toward the outside of the vehicle, detach the clips and remove the body rocker panel moulding assembly LH.