REAR BUMPER INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER COVER


    1. B000W7OC03
      B000WYJ Install in this Direction

      Connect the connector.

    2. Attach the claws <B> and claws <C>.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    3. Attach the claw <A>.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    4. B000W80

      Fold back a part of edge of the rear fender liner, and attach the claw and grommet.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    5. Install the screw.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    6. B000WSO

      Install the 2 screws.

    7. B000TSK

      Install the 8 clips.

    8. B000TR5

      Install the 4 screws.

  2. INSTALL REAR BUMPER CENTER GUARD


    1. B000YUI

      Type A:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

    2. B000UQD

      Type B:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

    3. B000W0C

      Type C:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

  3. INSTALL REAR COMBINATION LIGHT COVER LH

    B000UJSC01
    B000WYJ Install in this Direction

    1. Attach the claws as shown in the illustration, and install the rear combination light cover LH.

  4. INSTALL REAR COMBINATION LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.