BACK-UP LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT BACK-UP LIGHT ASSEMBLY


    1. B000VJTC01
      *a

      Component without harness connected

      (Back-up Light Assembly)

      Inspect the back-up light assembly.


      1. Apply battery voltage to the connector and check the illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 3(B/U)

        Negative (-) → 2(E)

        		 Back-up light assembly illuminates
        If the result is not as specified, replace the back-up light assembly.