REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LUGGAGE ELECTRICAL KEY SWITCH (for RH Side)

   
   
   1. 

      *a	Connector Clamp
      *b	Wire Harness Clamp

      Disconnect the connector clamp and connector.

   2. Detach the wire harness clamp.

   3. Remove the 2 screws and luggage electrical key switch.

2. REMOVE REAR BUMPER LOWER RETAINER LH

   
   

   1. 

      Detach the hook to remove the rear bumper lower retainer LH.

3. REMOVE REAR COMBINATION LIGHT PROTECTOR LH

   
   

   1. 

      Remove the 2 screws and rear combination light protector LH.

4. REMOVE REAR NO. 1 GARNISH BRACKET LH

   
   

   1. Remove the 8 screws.

   2. Detach the guide to remove the rear No. 1 garnish bracket LH.

      

5. REMOVE REAR COMBINATION LIGHT RIM LH

   
   

   1. 

      Detach the claw to remove the rear combination light rim LH.

6. REMOVE REAR COMBINATION LIGHT LENS LH

   
   

   1. Remove the screw.

   2. Slide the rear combination light lens LH to detach the hook to remove it.

      

      Remove in this Direction

      -

      -

7. REMOVE REAR BUMPER UPPER RETAINER LH

   
   

   1. Slide the rear bumper upper retainer LH to detach the hook to remove it.

      

      Remove in this Direction

      -

      -

8. REMOVE REAR COMBINATION LIGHT COVER LH

   
   
   1. 

      *a	Hook
      *b	Guide

      Detach the hook and guide.

   2. Using a screwdriver, detach the claw to remove the rear combination light cover LH from the rear No. 1 garnish bracket LH.

      Note

      Do not insert screwdrivers as the attachment surface (gray area in illustration) for the No. 1 rear garnish bracket LH claws break easily.

      Tech Tips

      Tape the screwdriver tip before use.

      

      	Remove in this Direction		Protective Tape
      	Easily damaged area	-	-

9. REMOVE REAR BUMPER PROTECTOR LH

   
   

   1. 

      Remove the rear bumper protector LH.

      Note

      The rear bumper protector LH must not be reused.