SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. B000WNMC03
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly LH)

      Inspect the side turn signal light assembly LH.


      1. Apply battery voltage to the connector and check the light illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1

        Negative (-) → 2

        		 Side turn signal light assembly LH illuminates
        If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    1. B000WNMC03
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly RH)

      Inspect the side turn signal light assembly RH.


      1. Apply battery voltage to the connector and check the light illumination conditions.

        OK
        Battery Connection Specified Condition

        Positive (+) → 1

        Negative (-) → 2

        		 Side turn signal light assembly RH illuminates
        If the result is not as specified, replace the side turn signal light assembly RH.