LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control, Illuminated Entry or Warning.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position.*1 Normal 0:Normal,1:Long Main body ECU (multiplex network body ECU)
        Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (multiplex network body ECU)
        Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (multiplex network body ECU)
        Light Auto OFF Delay Keep the headlights on for a certain period of time after turning the engine switch off and closing all doors with the low beam headlights on.*2 30 s 00:OFF,01:30 s,10:60 s,11:90 s Main body ECU (multiplex network body ECU)
        Sensitivity Adjusts the sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main body ECU (multiplex network body ECU)
        DRL Function Turns the DRL function on/off.*3 ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Follow Me Home Lighting Time Sets the headlight lighting time after the engine switch is turned off.*4 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main body ECU (multiplex network body ECU)
        Light up Clearance Lights at Door Unlock Function Setting of the light up clearance lights at door unlock function ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)

        • *1: Vehicles displaying the Item "Response Time" on the GTS

        • *2: Vehicles displaying the Item "Light Auto OFF Delay" on the GTS

        • *3: Vehicles displaying the Item "DRL Function" on the GTS

        • *4: w/ Follow Me Home System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          B000UL0E01

        • *B

          B000UL0E02

        • *C

          B000UL0E03

        Illuminated Entry
        Tester Display Description Default Setting ECU
        Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked Lights up outside handle lights when doors are unlocked using a mechanical key or door control transmitter. ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Mirror Foot Light Time/Exterior Light Time Changes the lighting time of the outside handle lights. 15 s 00:15 s,01:7.5 s,10:30 s,11:0 s Main body ECU (multiplex network body ECU)
        Exterior Light Control Changes the outside handle light control. ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        2 Steps Fade Out Control Function Changes the 2 steps fade out control function of the outside handle light control. ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
        Exterior Light (Door Open) Changes the door open control function of the outside handle light control. ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)

        Warning
        Tester Display Description Default Setting ECU
        Suggestion Service Function Turns the suggestion service function on/off. ON 00:OFF,01:Only Parked,11:ON Main body ECU (multiplex network body ECU)
        Lane Change Flashing Times Setting Function to change the lane change flashing times. 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination meter assembly

    2. Customizing with the multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.

      3. Select the setting by referring to the table below.

        Lights Settings
        Tester Display Description Default Setting ECU
        Light Sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main body ECU (multiplex network body ECU)
        Headlamps Auto-Off Timer*1 Keeps the headlights on for a certain period of time after turning the engine switch off and closing all of doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main body ECU (multiplex network body ECU)
        Daytime Running Lights*2 Turns the DRL function on/off. On On or Off Main body ECU (multiplex network body ECU)
        Exterior Lights Off Timer Changes the lighting time of the outside handle lights. 15 sec. Off, 7.5 sec., 15 sec. or 30 sec. Main body ECU (multiplex network body ECU)

        • *1: Vehicles displaying the Item "Headlamps Auto-Off Timer" on the multi-information display

        • *2: Vehicles displaying the Item "Daytime Running Lights" on the multi-information display

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          B000UL0E05
          *a Sensitivity of the automatic light control system
          *b Dark
          *c Bright
          *d Setting