PRECAUTION FOR EACH BULB REPLACEMENT
Always prepare a new bulb for immediate replacement. While replacing a bulb, the lens may attract dust and moisture if removed from the vehicle for a long time.
Always replace a bulb with another bulb of the same wattage.
Securely install the socket after bulb replacement. The lens may become cloudy or the light cavity may fill with water through gaps around the socket if the socket is not installed securely.
PRECAUTION FOR HEADLIGHT BEAM AXIS ADJUSTMENT
The headlight outer lens is made of synthetic resin and may melt or be damaged due to excessive heat. Therefore, do not keep the headlight covered for 3 minutes or more when the headlight is on.
PRECAUTION WHEN REPLACING NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH
If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information.
HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA (w/ Automatic High Beam System)
The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Forward Recognition Camera System.