WASHER MOTOR INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. B000WK4C02
      *a

      Component without harness connected

      (Windshield Washer Motor and Pump Assembly)

      Open Side:


      1. With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.

      2. Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → Terminal 1 (B)

        Battery negative (-) → Terminal 2 (SW)

        		 Washer fluid is pumped

        Tech Tips

        If the result is not as specified, replace the windshield washer motor and pump assembly.

    2. B000UIVC02
      *a

      Component without harness connected

      (Windshield Washer Motor and Pump Assembly)

      Close Side:


      1. With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.

      2. Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → Terminal 2 (SW)

        Battery negative (-) → Terminal 1 (B)

        		 Washer fluid is pumped

        Tech Tips

        If the result is not as specified, replace the windshield washer motor and pump assembly.