WIPER AND WASHER SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIPER AND WASHER SYSTEM


    1. Customizing with the GTS


      1. Turn the engine switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the engine switch on (IG).

      4. Turn the GTS on.

      5. Enter the following menus: Utility / Customize / Wiper.

      6. Select the setting by referring to the table below.


        Wiper
        Tester Display Description Default Setting ECU
        Auto Wiper Function to enable AUTO wiper operation Avail 0:Avail,1:Not Avl Rain Sensor

        Tech Tips

        Changes to the customize settings will not be applied until the engine switch is turned off then on (IG).