OUTER REAR VIEW MIRROR DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH

    Click here

  2. REMOVE NO. 2 OUTER MIRROR COVER LH


    1. B000XXF

      Remove the screw.

    2. B000WKEC01
      B000WCG Protective Tape

      Using a thin-bladed screwdriver, detach the claw.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    3. B000UOLC01
      B000WYJ Remove in this Direction

      Detach the claw and remove the No. 2 outer mirror cover LH (visor cover A).

    4. B000U0I

      Remove the 3 screws.

    5. B000TX9C01
      B000WCG Protective Tape

      Using a thin-bladed screwdriver, detach the claw.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    6. B000WHGC01
      B000WYJ Remove in this Direction

      Remove the No. 2 outer mirror cover LH (visor cover B).

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

    Click here

  4. REMOVE OUTER MIRROR ACTUATOR ASSEMBLY LH


    1. Remove the No. 2 outer mirror cover LH (visor assembly) from the outer mirror actuator assembly LH.