LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 DECK BOARD

    Click here

  2. REMOVE NO. 2 DECK BOARD

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. REMOVE REAR FLOOR FINISH PLATE

    Click here

  5. REMOVE LUGGAGE COMPARTMENT TRIM BOX

    Click here

  6. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  7. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  8. REMOVE INNER LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  9. REMOVE BACK DOOR LOCK PROTECTOR

    Click here

  10. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    Click here

  11. REMOVE REAR SEAT ASSEMBLY

    Click here

  12. REMOVE LUGGAGE DOOR LOCK OPENER ASSEMBLY


    1. B000W81

      Remove the 2 nuts and luggage door lock opener assembly.

    2. B000YD0C02
      B000WYJ Counterclockwise Direction

      Detach the cable clamp.

    3. Turn counterclockwise direction and disconnect the cable end from the luggage door lock opener assembly.

  13. REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY


    1. B000VDK

      Roll up it partially the room partition panel insulator.

    2. B000TSWC01
      *a Cable Clamp
      *b Clamp

      Detach the cable clamps on the room partition panel side and clamp.

    3. B000XRO

      Detach the clamps.

    4. B000VDD

      w/ Release Lever:

      Detach the clamp.

    5. B000X1S

      Detach the clamp and remove the luggage door control cable sub-assembly.