LUGGAGE COMPARTMENT DOOR SUPPORT DISPOSAL

PROCEDURE


  1. DISPOSE OF LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

    Note

    Make sure the piston rods are in the fully extended stake before performing work.


    1. Horizontally hold the luggage compartment door support assembly in a vise with the piston rod pulled out.

    2. B000WCEN02

      Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

      Specification
      Area Measurement
      A-B 10 mm (0.394 in.)

      CAUTION:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      B000XPP

      Tech Tips

      The gas is colorless, odorless and non-poisonous.