LUGGAGE COMPARTMENT DOOR SUPPORT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

    CAUTION:


    • Do not perform work if the trunk panel (luggage compartment door) is not securely supported.

    • The trunk panel (luggage compartment door) fall, resulting in injury.

    B000YAB

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

    • Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.

    • Check that the luggage compartment door support assembly is engaged in the ball joint and that the luggage compartment door support assembly cannot be pulled out.


    1. B000V16

      Attach the 2 ball joints to install the luggage compartment door support assembly.