CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU).
Connect the driver side junction block assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Engine switch on (ACC) | 11 to 14 V |
| None - Body ground | Engine switch off | Below 1 V | ||
| A-31 (BECU) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| A-32 (IG) - Body ground | None - Body ground | IG power supply | Engine switch on (IG) | 11 to 14 V |
| None - Body ground | Engine switch off | Below 1 V |
Install the main body ECU (multiplex network body ECU) to the driver side junction block assembly.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| P9-4 (TSW) - Body ground | W - Body ground | No. 3 combination switch assembly (luggage door opening switch) signal | No. 3 combination switch assembly (luggage door opening switch) on | Below 1 V |
| Engine switch off, all doors closed and No. 3 combination switch assembly (luggage door opening switch) off | Pulse generation | |||
| P7-27 (TMSW) - Body ground | B - Body ground | Luggage door opening cancel switch assembly signal | Luggage door opening cancel switch on | Below 1 V |
| Engine switch off, all doors closed and luggage door opening cancel switch off | 11 to 14 V | |||
| 3D-27 (LGCY) - Body ground | G - Body ground | Luggage compartment door courtesy switch input signal | Luggage compartment door open | Below 1 V |
| Luggage compartment door closed | 11 to 14 V | |||
| 3C-32 (TR+) - Body ground | Y - Body ground | Luggage opening relay (TRUNK OPN) output signal | Luggage compartment door lock assembly is operating | Below 1 V |
| Luggage compartment door lock assembly is not operating | 11 to 14 V |
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)