FRONT PASSENGER SIDE POWER WINDOW SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE FRONT DOOR ASSIST GRIP ASSEMBLY RH

    Click here

  2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

    Click here

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. B000YVZ

      Disconnect the connector.

    2. Remove the 7 screws of the backside of the front door trim board sub-assembly RH.

    3. B000XRA

      Remove the screw of the face of the front door trim board sub-assembly RH.

    4. B000UCPC01
      B000WYJ Remove in this Direction (1)
      B000YNM Remove in this Direction (2)

      Remove the power window regulator switch assembly with the No. 1 switch base as shown in the illustration.

    5. B000Y72

      Remove the 2 screws.

    6. Detach the guide and remove the No. 2 switch base from the No. 1 switch base.

    7. B000YEM

      Using a thin-bladed screwdriver, detach the claw and remove the power window regulator switch assembly from the No. 2 switch base.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.