POWER WINDOW MASTER SWITCH INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B000Z22C01
      *a

      Component without harness connected

      (Multiplex Network Master Switch Assembly)

      Check that the LED illuminates.


      1. Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        OK
        Battery Connection Specified Condition

        Battery positive (+) → 3 (ILL+)

        Battery negative (-) → 13 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the multiplex network master switch assembly.