POWER WINDOW MASTER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. B000TP1

      Attach the claw to install the multiplex network master switch assembly to the switch base.

    2. B000UB0

      Attach the claw to install the multiplex network master switch assembly with switch base to the front door trim board sub-assembly.

    3. Install the 3 screws.

    4. Connect the connector and attach the wire harness clamp.

    5. B000Z2Z

      Install the pull handle with the 5 screws.

    6. Attach the wire harness clamp.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH

    Click here

  4. INSPECT POWER WINDOW OPERATION

    Click here

  5. INSPECT DOOR LOCK OPERATION

    Click here