POWER WINDOW CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Turn the engine switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the engine switch on (IG).

      4. Turn the GTS on.

      5. Enter the following menus: Customize Setting / Power Window.

      6. Select the setting by referring to the table below.


        Power Window
        Tester Display Description Default Setting ECU
        Door Key P/W Up This function is used to close the windows by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down This function is used to open the windows by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Up W/ Transmit This function is used to close the windows using the electrical key transmitter sub-assembly.* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit This function is used to open the windows using the electrical key transmitter sub-assembly.* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        D Window Auto Up This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly LH (for LHD)

        • Power window regulator motor assembly RH (for RHD)
        P Window Auto Up This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly RH (for LHD)

        • Power window regulator motor assembly LH (for RHD)
        P Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly RH (for LHD)

        • Power window regulator motor assembly LH (for RHD)
        D Window Auto Down This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly LH (for LHD)

        • Power window regulator motor assembly RH (for RHD)
        P Window Auto Down This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly RH (for LHD)

        • Power window regulator motor assembly LH (for RHD)
        P Window Auto Down From Driver This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly. ON 0:OFF,1:ON

        • Power window regulator motor assembly RH (for LHD)

        • Power window regulator motor assembly LH (for RHD)

        • *: w/o Canister Pump Module

      7. Enter the following menus: Customize Setting / Wireless Door Lock.

      8. Select the setting by referring to the table below.


        Wireless Door Lock
        Tester Display Description Default Setting ECU
        P/W Wireless Ope Buzz This function turns the wireless power window buzzer response on or off.* ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        • *: w/o Canister Pump Module

      9. Enter the following menus: Customize Setting / Security.

      10. Select the setting by referring to the table below.


        Security
        Tester Display Description Default Setting ECU
        Window Open Warning This function is used to enable or disable the window open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

      11. Enter the following menus: Customize Setting / Warning.

      12. Select the setting by referring to the table below.


        Warning
        Tester Display Description Default Setting ECU
        Suggestion Service Function Headlight and power window operation suggestion function ON 00:OFF,01:Only Parked,11:ON Main body ECU (Multiplex network body ECU)

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Convenience Services.

      3. Select the setting by referring to the table below.

        Item Default Content Setting Relevant ECU
        Convenience Services On Headlight and power window operation suggestion function On, On While Stopped or Off Main body ECU (Multiplex network body ECU)