ROOF HEADLINING REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 ROOF WIRE


    1. for Glass Roof:


      1. Apply a new butyl tape as shown in the illustration.

        B000UQWC02
        *a Marking - -
        B000WCGC07 Butyl Tape - -

        Note

        Apply securely so that the butyl tape will not shift or peel off.

      2. Turn the visor connectors approximately 90° clockwise and connect to the roof headlining assembly.

        B000Z4JC01
        *A for LHD *B for RHD
        *a 90° - -

      3. Attach the clamps.

      4. Set No. 1 roof wire positioning tape at the position shown in the illustration on the No. 1 roof wire.

        B000TW5C01
        *A for LHD *B for RHD
        *a Positioning Tape *b Adjustment Area
        *c Roof Set Position - -

      5. Apply fastening tape to the position shown in the illustration to install the No. 1 roof wire to the roof headlining assembly.

        B000W5VC01
        *A for LHD *B for RHD
        B000WCG Fastening Tape - -

    2. for Carbon Roof:


      1. for LHD:

        Apply a new butyl tape as shown in the illustration.

        B000Y3KC02
        *a Marking - -
        B000WCGC07 Butyl Tape - -

        Note

        Apply securely so that the butyl tape will not shift or peel off.

      2. for RHD:

        Apply a new butyl tape as shown in the illustration.

        B000VUZC01
        *a Marking - -
        B000WCGC07 Butyl Tape - -

      3. Turn the visor connectors approximately 90° clockwise and connect to the roof headlining assembly.

        B000WPBC01
        *A for LHD *B for RHD
        *a 90° - -

      4. Attach the clamps.

      5. Set No. 1 roof wire positioning tape at the position shown in the illustration on the No. 1 roof wire.

        B000W58C01
        *A for LHD *B for RHD
        *a Positioning Tape *b Adjustment Area
        *c Roof Set Position - -

      6. Apply fastening tape to the position shown in the illustration to install the No. 1 roof wire to the roof headlining assembly.

        B000WJGC01
        *A for LHD *B for RHD
        B000WCG Fastening Tape - -

  2. INSTALL ROOF SILENCER PAD (for Carbon Fiber Reinforced Plastic Roof)


    1. B000UPOC01
      B000Y3N Marking

      Using double-sided tape or three cement yellow, install a new roof silencer pad in the position shown in the illustration.

  3. INSTALL ROOF HEADLINING HOLDER COVER


    1. B000UXL

      Attach the claws and install the roof headlining holder cover.

      Tech Tips

      Use the same procedure for the opposite side.

  4. INSTALL TELEPHONE MICROPHONE ASSEMBLY

    Click here

  5. INSTALL TELEPHONE MICROPHONE ASSEMBLY (w/ Telematics Transceiver)

    Click here

  6. INSTALL ACTIVE NOISE CONTROL MICROPHONE

    Click here

  7. INSTALL COAT HOOK


    1. B000YM3

      Attach the claws and install the coat hook.

      Tech Tips

      Use the same procedure for the opposite side.