FRONT CONSOLE BOX INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. Align the guides and attach the claws and clip in the direction of the arrow shown in the illustration to temporarily install the console box assembly.

      B000XG3C01
      B000WYJ Install in this Direction - -
    2. B000XCI

      Install the bolt.

    3. B000X7M

      Install the 2 bolts.

    4. B000VSK

      Install the 5 bolts.

    5. B000YM2

      Install the console box assembly with the 2 bolts.

    6. B000YBB

      Connect the 2 connectors and attach the clamp.

  2. INSTALL NO. 1 GLOVE COMPARTMENT PANEL

    Click here

  3. INSTALL EQUIPMENT SET PANEL


    1. B000YWN

      Connect the 3 connectors.

    2. B000X08C01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration.

    3. B000XGVC01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration to install the equipment set panel.

  4. INSTALL EQUIPMENT SET PANEL COVER


    1. B000XZHC01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration to install the equipment set panel cover.

  5. INSTALL LOWER CONSOLE BOX


    1. B000VR4C01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration to install the lower console box.

  6. INSTALL UPPER CONSOLE BOX


    1. B000WR0C01
      B000WYJ Install in this Direction

      Align the guide and attach the claws in the direction of the arrow shown in the illustration to install the upper console box.

  7. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  8. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  9. INSTALL SHIFTING HOLE COVER ASSEMBLY


    1. B000V6F

      Connect the 3 connectors.

    2. B000TUUC01
      B000WYJ Install in this Direction

      Set the shifting hole cover assembly on the shift lever in the direction of the arrow shown in the illustration.

    3. B000XUIC01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration.

    4. B000VJPC01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration to install the shifting hole cover assembly.

    5. Remove the protective tape.

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  11. INSTALL RADIO REMOTE TUNING SWITCH ASSEMBLY

    Click here

  12. INSTALL REAR CONSOLE BOX POCKET

    Click here