AIR CONDITIONING PANEL REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  2. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  3. REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE RADIO REMOTE TUNING SWITCH ASSEMBLY

    Click here

  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  7. REMOVE SHIFTING HOLE COVER ASSEMBLY

    Click here

  8. REMOVE UPPER CONSOLE BOX

    Click here

  9. REMOVE NO. 1 GLOVE COMPARTMENT PANEL

    Click here

  10. REMOVE BOX PANEL SUB-ASSEMBLY


    1. B000V6PC01
      B000XM7 Bolt
      B000TT4 Screw

      Remove the 3 bolts and 2 screws.

    2. B000TPLC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Hold the area shown in the illustration and while pulling towards the exterior of the vehicle detach the clip.

    3. B000VHOC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Hold the area shown in the illustration and while pulling towards the exterior of the vehicle detach the clip.

    4. B000TQ2C01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Hold the area shown in the illustration, detach the claw and remove the box panel sub-assembly.

  11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. B000TV1C01
      B000XM7 Bolt
      B000TT4 Screw

      Move the front seat (RH side) to the rearmost position and remove the 2 bolts and 2 screws.

    2. B000U01

      Remove the bolt.

    3. B000Y1AC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Fold the front seatback (RH side) forward, hold the area shown in the illustration and while pulling towards the exterior of the vehicle detach the clip and claw.

    4. B000W9SC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Hold the area shown in the illustration while pulling it towards, the rear of the vehicle, detach the clip and claw and then pull out the guide from the instrument panel.

    5. B000WW6C01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Return the front seatback (RH side) to the original position, hold the area shown in the illustration and while pulling towards the exterior of the vehicle detach the claw.

    6. B000Y6AC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Hold the area shown in the illustration and while pulling towards the exterior of the vehicle detach the claw.

    7. B000U72C01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction (1)
      B000YNM Remove in this Direction (2)

      Pull diagonally to the upper rear of the vehicle as indicated by the arrows shown in the illustration to remove the upper console panel sub-assembly.

      Note

      A portion of the claw is inserted into mating hole. Therefore, hold the area shown in the illustration and remove it while lifting the claw towards the outside of the vehicle.

  12. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  13. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  14. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  15. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. B000W2OC01
      B000WCN Place Hands Here
      B000WYJ Remove in this Direction

      Place your hand at the position shown in the illustration and pull the integration control and panel assembly towards the rear of the vehicle to detach the claw and clip and remove it

    2. B000XZY

      Using a thin-bladed screwdriver, detach the clamp and disconnect the 3 connectors.