ROOF HEADLINING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL ROOF SIDE RAIL GARNISH


    1. B000Z78C01
      B000WYJ Install in this Direction

      Attach the clamps to install the roof side rail garnish.

      Tech Tips

      Use the same procedure for the opposite side.

  2. INSTALL ROOF HEADLINING ASSEMBLY


    1. B000VGN

      Install a new grommet to the vehicle.

      Tech Tips

      Use the same procedure for the RH side.

    2. B000X6CC01
      *a Clip (White)
      *b Clip (Black)
      B000WYJ Install in this Direction

      Install the 3 clips to the roof headlining assembly.

    3. B000X9T

      Install the roof headlining:

    4. Carry the roof headlining assembly through the passenger door into the vehicle as shown in the illustration without making contact with the body interior.

      B000YR4C01
      B000WYJ Install in this Direction - -

      Note


      • The procedure must be performed by multiple people to prevent deformation of the roof headlining assembly.

      • Check that the corners of the roof headlining assembly are free of bending, twisting and other deformation and that none of the mounted parts are falling off.

      • Do not damage the roof headlining assembly and body interior.

    5. B000UC4

      Attach the clips.

    6. B000Y65C01
      B000WYJ Install in this Direction

      for Glass Roof:

      Attach the fasteners.

    7. B000W49C01
      B000WYJ Install in this Direction

      for Carbon Roof:

      Attach the fasteners.

    8. B000WE7C01
      B000WYJ Install in this Direction

      Attach the claws and install the roof headlining assembly.

      Tech Tips


      • Check that the front roof side rail weatherstrip is not pinched between the roof headlining assembly and body.

      • Use the same procedure for the opposite side.

    9. B000V6E

      Install the screw to the coat hook.

      Tech Tips

      Use the same procedure for the opposite side.

    10. Front pillar LH part:


      1. Remove the protective cover installed to the front pillar LH.

      2. B000X2J

        Connect the 2 connectors.

      3. Attach the clamps to connect the No. 1 roof wire.

      4. Install the protective cover to the front pillar LH.

    11. B000WTG

      Connect the 2 connectors.

  3. INSTALL VISOR HOLDER LH


    1. B000WCW

      Attach the claws as shown in the illustration.

    2. B000USIC01
      B000WYJ Install in this Direction

      Push in the end of the visor holder LH to install the visor holder LH.

  4. INSTALL VISOR HOLDER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL RAIN SENSOR COVER

    Click here

  6. INSTALL MAP LIGHT SUB-ASSEMBLY

    Click here

  7. INSTALL VISOR ASSEMBLY LH


    1. B000Z0OC01
      B000WYJ Install in this Direction

      Align the visor assembly LH and the vehicle side connector and screw hole to set it in place.

      Note


      • Set the visor assembly LH directly upwards so that the connector is not damaged.

      • Hold the visor assembly with one hand so that it does not drop.

    2. Install the 2 screws.

    3. Set the visor assembly LH to the visor holder LH.

  8. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL VISOR BRACKET COVER LH


    1. B000X5Z

      Attach the claws and install the visor bracket cover LH.

  10. INSTALL VISOR BRACKET COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH


    1. Peel off the adhesive tape and remove the protective cover.

    2. B000YDY

      Attach the 2 inner upper roof side garnish clips to the inner roof side garnish assembly LH.

      Note


      • If there is extreme damage to the inner upper roof side garnish clip, replace it with a new one.

      • Make sure that the position and direction of the inner upper roof side garnish clip is correct when installing.

    3. B000XLRC02
      B000WYJ Install in this Direction

      Insert the guides in direction indicated by the arrow shown in the illustration.

    4. B000YUWC01
      B000WYJ Install in this Direction

      Attach the inner upper roof side garnish clips in the direction of the arrow shown in the illustration to install the inner roof side garnish assembly LH.

  12. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH


    1. B000XNP

      Attach the roof side trim garnish clip to the roof side rail garnish assembly LH.

      Note


      • If there is extreme damage to the roof side trim garnish clip, replace it with a new one.

      • Make sure that the position and direction of the roof side trim garnish clip is correct when installing.

    2. B000TSBC01
      B000WYJ Install in this Direction

      Attach the roof side trim garnish clip and clips in the direction of the arrow shown in the illustration to install the roof side rail garnish assembly LH.

  14. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. INSTALL INNER ROOF SIDE GARNISH LH


    1. B000XYKC01
      B000WYJ Install in this Direction

      Attach the clips in the direction of the arrow shown in the illustration.

    2. B000XENC01
      B000WCN Place hand here
      B000WYJ Install in this Direction

      Attach the clips in the direction of the arrow shown in the illustration.

    3. Place your hand at the position shown in the illustration, attach the claw and install the roof side inner garnish LH as shown in the illustration.

  16. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL CENTER PILLAR GARNISH ASSEMBLY LH


    1. B000VY7C01
      B000WYJ Install in this Direction

      Pass the seat belt guide LH and front seat outer belt assembly LH (floor anchor) through the center pillar garnish assembly LH.

    2. Push in the guides in the direction of the arrow shown in the illustration and attach the claws to install the seat belt guide LH.

    3. B000Z92C01
      B000WYJ Install in this Direction

      Attach the claw and clip in the installation direction shown in the illustration.

    4. B000TQ6C01
      B000WYJ Install in this Direction

      Insert the hooks from direction indicated by the arrow shown in the illustration.

    5. B000TRG

      Install the center pillar garnish assembly LH with the 2 clips.

  18. INSTALL CENTER PILLAR GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  19. INSTALL QUARTER TRIM PANEL ASSEMBLY LH


    1. B000VNL

      Connect the connector.

    2. B000WQVC01
      B000WYJ Install in this Direction

      Attach the clip in the direction of the arrow shown in the illustration.

    3. B000XG1C01
      B000WYJ Install in this Direction

      Attach the clips in the direction of the arrow shown in the illustration.

    4. B000VSMC01
      B000WYJ Install in this Direction

      Attach the claws in the direction of the arrow shown in the illustration.

    5. B000XL6C01
      B000WYJ Install in this Direction

      Attach the clip and claws in the direction of the arrow shown in the illustration.

    6. B000YS9C01
      B000WYJ Install in this Direction

      Attach the clip and claws in the direction of the arrow shown in the illustration.

    7. Attach the hook and install the quarter trim panel assembly LH.

    8. B000WVL

      Install the 2 clips.

    9. B000U1N

      Attach the clamp.

  20. INSTALL QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  21. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

  22. INSTALL REAR SEAT INNER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the rear seat No. 1 inner belt assembly LH.

  23. INSTALL QUARTER INSIDE TRIM BOARD LH


    1. B000UJTC01
      B000WYJ Install in this Direction

      Attach the claw in the direction of the arrow shown in the illustration to install the quarter inside trim board LH.

  24. INSTALL QUARTER INSIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

  25. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH(FLOOR ANCHOR)

    Click here

  26. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH(FLOOR ANCHOR)

    Tech Tips

    Use the same procedure described for the LH side.

  27. INSTALL OUTER LAP BELT ANCHOR COVER

    Click here

  28. INSTALL FRONT PILLAR GARNISH LH


    1. Peel off the adhesive tape and remove the protective cover.

    2. B000U8T

      Install the front pillar garnish clip to the front pillar garnish LH.

      Note


      • If there is extreme damage to the front pillar garnish clip, replace it with a new one.

      • Make sure that the position and direction of the front pillar garnish clip is correct when installing.

    3. B000W90C01
      B000WYJ Install in this Direction

      Insert the guides as shown in the illustration.

    4. B000Y3UC01
      B000WYJ Install in this Direction

      Attach the clip as shown in the illustration.

    5. B000TPY

      Attach the front pillar garnish clip to install the front pillar garnish LH.

    6. Remove the protective tape.

  29. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  31. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER RH

    Click here

  32. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  33. INSTALL FRONT DOOR OPENING TRIM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  34. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  35. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  36. INSTALL NO. 1 CONSOLE BOX SUPPORT

    Click here

  37. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

    Click here

  38. INSTALL REAR SEAT ASSEMBLY

    Click here

  39. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  40. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  41. INITIALIZATION OF SEAT ECU

    Click here

  42. INSPECT SRS WARNING LIGHT

    Click here