COMPRESSOR INSPECTION

PROCEDURE


  1. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY


    1. B000XWSC03
      *a

      Component without harness connected

      (Compressor Assembly with Pulley (Compressor Solenoid))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (-) - 2 (+) 25°C (77°F) 10.1 to 11.1 Ω

      If the resistance is not as specified, replace the compressor assembly with pulley.