FRONT BLOWER MOTOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. B000W48C01
      B000XM7 Screw
      B000TT4 Connector

      Detach the clamp.

    2. Disconnect the connector.

    3. Remove the 3 screws.

      Note


      • Support the blower motor with fan sub-assembly so that it does not drop when performing this procedure.

      • Do not drop or subject the parts to any impact.

    4. B000XR8C01
      B000WYJ Remove in this Direction

      Remove the blower motor with fan sub-assembly as shown in the illustration.

      Note

      Make sure there is no interference with the fan as it will impact the cooling performance.

    5. B000XVOC01
      *1 Heater Packing

      When reusing the blower motor with fan sub-assembly:


      1. Remove the heater packing from the blower motor with fan sub-assembly.