REAR SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  3. REMOVE QUARTER INSIDE TRIM BOARD LH

    Click here

  4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. B000VZDC04
      B000XM7 Connector
      B000TT4 Bolt

      Disconnect the connector.

    2. Remove the bolt.

    3. Pass the wire harness and connector of the rear No. 1 seat inner belt assembly LH through the hole on the quarter trim panel assembly LH.

      Note

      Take care not to damage the wire harness and connector.

    4. Remove the rear No. 1 seat inner belt assembly LH.