FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B000ZBZ

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)


    1. B000VEG

      Install the front seat belt anchor plate.

    2. B000TRUC02
      B000WCG Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. B000YWK

      Attach the wire harness clamps.

    4. B000WN2

      Attach the claw and install the connector to the front seat cushion wire harness holder LH.

    5. Connect the 2 connectors and attach the wire harness clamps.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)


    1. B000VPS

      Install the front seat belt anchor plate.

    2. B000VUMC02
      B000WCG Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    3. B000X5T

      Attach the wire harness clamps.

    4. B000UUY

      Attach the wire harness clamps.

    5. Connect the 2 connectors.

    6. Attach the claw and install the connector.

    7. B000YS5

      Attach the rubber band of the separate type front seatback cover to the 2 hooks.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here

  4. INITIALIZATION OF SEAT ECU

    Click here

  5. INSPECT SEAT BELT WARNING SYSTEM

    Click here