CHILD RESTRAINT SEAT ANCHOR BRACKET INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. B000V7XN01

      Temporarily install the child restraint seat anchor bracket sub-assembly LH with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      32 N*m  { 326 kgf*cm, 24 ft.*lbf }

  2. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

  3. INSTALL REAR SEATBACK COVER

    Click here

  4. INSTALL REAR SEAT SIDE GARNISH

    Click here

  5. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  6. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here