FRONT SEAT CUSHION HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

B000ZBZ

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (for Standard Seat Type)


    1. B000XM0

      Using a tacker, install the front seat cushion heater assembly LH to the separate type front seat cushion cover with 44 new tack pins.

      Tech Tips


      • Secure the front seat cushion heater assembly LH so that it does not bend or stretch.

      • Set the front seat cushion heater assembly LH so that the nichrome wire is on the separate type front seat cushion cover LH side.

  2. INSTALL FRONT SEAT CUSHION PAD WITH COVER LH (FRONT SEAT CUSHION HEATER) (for Sports Seat Type)


    1. B000Z3YC02
      B000WYJ Install in this Direction

      Set the front seat cushion pad with cover LH(front seat cushion heater) on the front seat adjuster assembly LH.

    2. B000VLB

      for Front Passenger Seat:


      1. Attach the claw and install the connector of the occupant detection sensor.

    3. Attach the hooks.

      B000ZBD
    4. B000WR9

      Attach the wire harness clamp and connect the connector.

  3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (for Standard Seat Type)

    Click here

  4. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Standard Seat Type)

    Click here

  5. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Click here

  6. INSTALL LIMIT SWITCH ASSEMBLY

    Click here

  7. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  10. INITIALIZATION OF SEAT ECU

    Click here