FRONT SEATBACK HEATER INSPECTION

PROCEDURE


  1. INSPECT FRONT SEATBACK SUB-ASSEMBLY LH (for Standard Seat Type)


    1. B000WFVC02
      *a Connector A
      *b Connector B
      *c

      Component without harness connected

      (Front Seatback Sub-assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - A-2 Always (20°C) 2.44 to 3.66 Ω
      A-1 - B-2
      A-1 - B-1 1.20 to 1.80 Ω
      A-2 - B-1 3.24 to 4.86 Ω
      B-1 - B-2
      A-2 - B-2 Below 1 Ω
      If the result is not as specified, replace the front seatback sub-assembly LH.

  2. INSPECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)


    1. B000WF6C02
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always (20°C) 1.76 to 2.64 Ω
      If the result is not as specified, replace the separate type front seatback cover.

  3. INSPECT FRONT SEATBACK PAD WITH COVER LH (for Sports Seat Type)


    1. B000YOXC02
      *a

      Component without harness connected

      (Front Seatback Pad with Cover LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always (23°C) 1.16 to 1.74 Ω
      If the result is not as specified, replace the front seatback pad with cover LH.

  4. INSPECT FRONT SEATBACK SUB-ASSEMBLY RH (for Standard Seat Type)


    1. B000WFVC02
      *a Connector A
      *b Connector B
      *c

      Component without harness connected

      (Front Seatback Sub-assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - A-2 Always (20°C) 2.44 to 3.66 Ω
      A-1 - B-2
      A-1 - B-1 1.20 to 1.80 Ω
      A-2 - B-1 3.24 to 4.86 Ω
      B-1 - B-2
      A-2 - B-2 Below 1 Ω
      If the result is not as specified, replace the front seatback sub-assembly RH.

  5. INSPECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)


    1. B000WF6C02
      *a

      Component without harness connected

      (Separate Type Front Seatback Cover)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always (20°C) 1.76 to 2.64 Ω
      If the result is not as specified, replace the separate type front seatback cover.

  6. INSPECT FRONT SEATBACK PAD WITH COVER RH (for Sports Seat Type)


    1. B000YOXC02
      *a

      Component without harness connected

      (Front Seatback Pad with Cover RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always (23°C) 1.16 to 1.74 Ω
      If the result is not as specified, replace the front seatback pad with cover RH.