SEAT MEMORY SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT DOOR TRIM COVER SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE SEAT MEMORY SWITCH


    1. B000ULAC01
      B000XM7 Connector
      B000TT4 Screw

      Disconnect the connector.

    2. Remove the 2 screws.

    3. B000XXG

      Using moulding remover A, push in the direction indicated by the arrow shown in the illustration, detach the claws and remove the seat memory switch.

    4. B000TQCC01
      B000WYJ Remove in this Direction

      Remove the bracket from the front door trim board sub-assembly LH.