PRE-COLLISION SYSTEM WARNING BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER (PRE-COLLISION CITY BUZZER)


    1. B000YBSC03
      *a

      Component without harness connected

      (Skid Control Buzzer (Pre-collision City Buzzer))

      Apply battery voltage and check the operation of the skid control buzzer (pre-collision city buzzer) according to the value(s) in the table below.

      OK
      Battery Connection Specified Condition

      Battery positive (+) → Terminal 2 (IG1)

      Battery negative (-) → Terminal 1 (BZ)

      		 Skid control buzzer (pre-collision city buzzer) sounds

      If the result is not as specified, replace the skid control buzzer (pre-collision city buzzer).