TRIP SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE REAR CONSOLE BOX POCKET

    Click here

  2. REMOVE RADIO REMOTE TUNING SWITCH ASSEMBLY

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE SHIFTING HOLE COVER ASSEMBLY

    Click here

  5. REMOVE UPPER CONSOLE BOX

    Click here

  6. REMOVE BOX PANEL SUB-ASSEMBLY

    Click here

  7. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  8. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  9. REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  11. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  12. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  13. REMOVE TRIP SWITCH


    1. B000UGQC02
      B000WYJ Remove in this Direction
      B000WCG Protective Tape

      Using a thin-bladed screwdriver, detach the claws and remove the trip switch.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.