NAVIGATION ANTENNA INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION ANTENNA BRACKET

  2. INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. B000YSOC01
      B000WYJ Install in this Direction

      Attach the guides to insert the navigation antenna assembly as shown in the illustration.

    2. Attach the claws to install the navigation antenna assembly.

  3. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET


    1. B000W4T

      Install the navigation antenna assembly with bracket with the 2 screws.

    2. B000WZL

      Connect the connector and attach the claws.

  4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. INSTALL NO. 2 DECK BOARD

    Click here

  7. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  8. CHECK SRS WARNING LIGHT

    Click here