MULTI-DISPLAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE


  1. INSTALL MULTI-DISPLAY


    1. B000XIZ

      Connect the 5 connectors and attach the clamp.

    2. Attach the claw in the order shown in the illustration to install the multi-display.

      B000W70N01

      Note

      If the claws are not attached in the order shown in the illustration, the multi-display may become damaged.

    3. Install the 4 bolts.

      B000VHM

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  6. INSTALL COMBINATION METER ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  8. INSTALL NO. 2 DECK BOARD

    Click here