RADIO ANTENNA CORD INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Attach the clamps to install the No. 4 antenna cord sub-assembly.

      

   2. Connect the 2 connectors.

2. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. w/o Digital Audio Broadcasting Antenna:

      
      

      1. Attach the clamps to install the No. 3 antenna cord sub-assembly.

         

      2. Connect the 2 connectors.

   2. w/ Digital Audio Broadcasting Antenna:

      
      

      1. Attach the clamps to install the No. 3 antenna cord sub-assembly.

         

         Bolt

         Connector

      2. Install the bolt.

      3. Connect the 3 connectors.

3. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

   Click here

4. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

5. INSTALL ROOF HEADLINING ASSEMBLY

   Click here

6. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Attach the clamps to install the No. 2 antenna cord sub-assembly.

      

      Bolt

      Connector

   2. Install the 3 bolts.

   3. Connect the 3 connectors.

7. INSTALL NO. 3 SPEAKER ASSEMBLY WITH BOX

   Click here

8. INSTALL CONSOLE BOX ASSEMBLY

   Click here

9. INSTALL REAR SEAT ASSEMBLY

   Click here

10. INSTALL ANTENNA CORD SUB-ASSEMBLY

    
    

    1. Attach the clamps, claws to install the antenna cord sub-assembly to the instrument panel safety pad sub-assembly.

       

11. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

13. INSTALL NO. 2 DECK BOARD

    Click here

14. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

15. CHECK SRS WARNING LIGHT

    Click here