INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. B000X9YC01
      B000WCG Protective tape

      Install the front No. 2 speaker assembly with the 2 screws.

  2. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. B000V4VC01
      B000WCG Protective tape

      Attach the claws to install the No. 1 speaker opening cover assembly.

    2. Remove the protective tape.

  3. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. B000WHN

      Install the front No. 1 speaker assembly with the 2 screws.

  4. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT PILLAR GARNISH LH

    Click here

  6. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  7. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  8. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here